Kinetik Wellbeing 842/5773, Руководство пользователя

Страница: 15 / 29

Memory
The device can store 60 sets of measurements for 3 different users. The last 3 readings for each
individual user will have the average (mean) calculated and stored automatically.
To check the memory, press the MEM button (either just after a measurement has been taken or while
the unit is off). Then press the MEM button again so that reading measurements are displayed. The
memories shown will be from the User that has taken the most recent measurement (which will be
indicated by U1/User 1, U2/User 2 or U3/User 3 flashing on screen)
The unit will show the average of the last three readings. Press the MEM button to scroll up or the SET
button to scroll down through the individual memories.
Note that the most recent measurement is always stored in memory slot 1. Once all 60 memory slots are
filled, the oldest memory will be erased during the next measurement to make room for the latest
memory
•
If you want to be shown the memories
of another User, press the START/STOP
button while the unit is off. Press the
MEM button to change to a different
User and confirm your selection by
pressing the START/STOP button.
Before the device inflates, press the
START/STOP button again to turn the
monitor off.
14
请
用AI或EPS
档
案印刷。
PDF文
档
只供参考，不可用于印刷，
敬
请
留意。