Kinetik TD3 Series, Руководство пользователя

Страница: 13 / 27

Technical Information
Note: Not intended to be sterilized.
Not for use in an OXYGEN RICH ENVIRONMENT
Modes
Typical operation
time of Battery
Behaviour of equipment
while the rechargeable
internal electrical power
source is charging:
Typical service
life of Battery
Output intensity
Output Voltage
Pulse duration
Power supply Powered by internal 3.7V li-ion battery
Biphasic rectangular wave pulse
100us (Microseconds)
1-100Hz (Hz=vibration per second)
Max. 70Vpp ±20%(at 500ohm load)
10 min, 20 min, 30 min, 40 min,
50 min, 60 min
No use (in storage): 1 year
In use: 30 uses
0 to 20 levels, adjustable
12 auto modes
To use both channels together at level 10,
the battery can be used 570 mins after fully
charged. If to use at level 20, the battery can
be used for 180 mins after fully charged.
The battery icon on the right corner will flash
during charging and will be still with full
capacity after fully charged.
300 times of recharging
Automatic shutoff
Degree of protection against electric shock
Type of protection against electric shock
Grade of waterproof
Product life
Lifetime for electrode pad
Mode of operation
Software version
The time required for equipment to warm from
the minimum storage temperature between
uses until it is ready for intended use
The time required for me equipment to cool
from the maximum storage temperature
between uses until it is ready for intended use
Adapter for charging
After 20 minutes without use
Type BF applied part
Internally powered equipment
IP22
1 year
Continuous operation
A0
30 minutes
15 minutes
Please use output DC5V
and output current 0.3-2.0A
adapter for charging
Treatment time
Pulse frequency
Waveform and wave shape
Model/type TD3 Weight 40g
12
For support… Visit our website: www.kinetikwellbeing.com / Email: customercare@kinetikwellbeing.com / Call: +44 1483 937969