Kinetik KISP-E200-LP, Инструкция по эксплуатации

Страница: 6 / 12

Installation Instructions
(continued)
5.
7.
6.
Place each speaker into the hole, with
the black plastic dog legs on the rear of
the speaker tucked in, and tighten the
four screws with a Phillips-head screw-
driver.
The dog legs will turn and lock the
speaker into the ceiling / wall. The
fixing should be firm but do not
overtighten as this can strip the thread
and cause difficulties for speaker
removal.
When you are happy the system is
working, apply the speaker grille to the
speaker. The magnets will hold the
grille in place.
Repeat these steps for all speakers.
Direct the pivotable tweeter to desired
position.
6
Tweeter
See ‘Additional Features’ section
for more details.