Kinetik KISP-E160-IC, Инструкция по эксплуатации

Страница: 6 / 12

Installation Instructions
(continued)
5.
7.
6.
Place each speaker into the hole, with
the white plastic dog legs on the rear of
the speaker tucked in, and tighten the
four screws with a Phillips-head screw-
driver.
The dog legs will turn and lock the
speaker into the ceiling / wall. The
fixing should be firm but do not
overtighten as this can strip the thread
and cause difficulties for speaker
removal.
When you are happy the system is
working, fix the speaker grille to the
speaker. You can use the supplied
fixing gum to more effectively secure
the grille by placing small amounts
between the grille and speaker bezel if
required.
Repeat these steps for all speakers.
Direct the pivotable tweeter to desired
position and check / modify the treble
switch as required.
6
Tweeter
Treble
boost / cut switch
See ‘Additional Features’ section
for more details about these.