Putting on the Cuff :
a. Place the cuff on bare skin of left wrist and be sure to place
sphygmomanometer (the device) on the centre of the wrist, as in the picture.
b. Place the cuff 1~2cm above the wrist joint.
c. Use your free hand to adjust the tightness of the cuff until it is firm.
d. To ensure the cuff is the correct tightness, no tension should be felt on the
wrist.
5
Setting up your Blood Pressure Monitor
Please put the cuff on the left wrist.
Do not wrap the cuff too tightly, otherwise results will be inaccurate.
The cuff can be detached from the sphygmomanometer and cleaned by hand
with warm, soapy water. Rinse thoroughly with cold water and towel dry.
To detach the cuff, carefully pull it away from the monitor body. To reattach,
push the cuff and monitor body together so that the clips lock in place,
ensuring it is the correct way around (the long part of the cuff should be to the
left of the LCD screen).
DO NOT IRON.
