Clearing the memory
Whilst in memory display mode, hold down the “M” button for three seconds. All stored results will be
deleted after three “beeps”. The LCD will appear as in the left hand picture below and will then display
all zeros to indicate that no stored results exist.
10
Using your Blood Pressure Monitor
b. Press “M” button again after the final memory result, or press “START” at any time whilst in memory
display mode, to switch the device off. In this mode, the device will automatically switch off after one
minute of inactivity.
c. If there are no results stored in the memory, the LCD will show “0” for both blood pressure readings and
for pulse rate, and “00” for the memory number. Pressing “M” or “START” button will switch the device
off.
Shut Down
Please turn the unit off after measurement if not re-measuring.
The unit has an automatic ‘switch off’ mechanism which means it will turn off after 1
minute if not being used.
