30
9. Technical data
Input
Output
Video/Audio
interfaces
2 x HDMI (HDMI 1.4 with
HDCP), VGA, audio (3.5 mm)
Video/Audio
interfaces
HDMI (HDMI 1.4 with HDCP),
audio (3.5 mm)
HDBaseT
HDBaseT-In
HDBaseT
HDBaseT-Out
USB socket
Type-A, max. 2A
Control
I/O inputs
One contact input (3-pin.
Phoenix connector) each for:
- HDMI1, HDMI2 and VGA
- ShowMe-function
I/O outputs
One output (3-pin. Phoenix
connector) each with LED
driver for:
- HDMI1, HDMI2 and VGA
- ShowMe-function
RS232
3-pin. Phoenix connector for
device control
General
Resolution range
HDMI: 1080P/1080i/720P/57
6P/480P/576i/480i
DP & VGA:
800x600/1024x768/1280
x 800/1280x1024/1400
x1050/1600 x1200/1920
x1080/1920 x1200
Operating
temperature
Humidity
Storage
temperature
0°C up to 35°C
10% up to 90%,
non-condensing
-20°C up to 70°C
Input level
0,5 – 1,0 Vp-p (DDC: 1,2Vp-p) Audio output
DTS-HD, Dolby HD
EDID/DDC
Supports Extended Display Identification Data (EDID) and Display Data Channel
(DDC) data via DVI and HDMI Standards, EDID and DDC signals
HDCP
Compatible with high-bandwidth Digital Content Protection (HDCP).
Mains unit
100 VAC ~ 240 VAC, 50/60 Hz
secondary 12 V DC, 3A
Energy
consumption
12 W max.
(without charging function)
Dimensions
Transmitter:
223 x 26 x 100 mm (WxHxD)
Weight
approx. 0.8 kg
(without mains unit)
Scrensaver:
If a Quickselect unit is activated without any active source being connected (by pressing the internal or
external Show-Me button), the screensaver of the internal VGA-to-HDMI scaler appears. The screensaver
shows the current installed firmware version of the individual Quickselect module.
If required in specific cases the screensaver can be deactivated (or re-activated) by using the RS232
“Send” text field of the GUI software. Click “Clear” to clear the text field and type in the following
command:
Screensaver Off: 7B 7B 1A 00 02 FF 00 0B 7D 7D
Screensaver On: 7B 7B 1A 00 02 FF 01 0C 7D 7D
Note:
After re-activating the screensaver which has been deactivated before, the screensaver only
becomes active if the video input source is disconnected and reconnected or if the Quickselect unit
is power cycled.
