24
4.1 Adjusting handle position (Fig. 2)
Simultaneously push the handle adjuster on both sides (L). Then place the handle in the
desired position. Release the button when near the ideal position, adjust the handle slightly
until you hear a “click”.
Handle positions:
1 Stable position/bouncer
2 Rocker position
3 In car safety position
4.2 Cushion (Fig. 3)
The seat cushion supports and protects your baby’s head and back. The cushion (Fig. 3E
behind the head and back) can reduce the pressure on baby’s waist (After your bab
y grows
up, the cushion can be removed to provide more space inside the seat).
4.2 Using the sun protector (Fig. 4)
The sun protector is used to prevent direct sunlight on your child’s face. When using the sun
protector, first adjust the handle to position 3, then fasten the sun protector to the handle.
When the sun protector is not in use, release the buttons of the handle and fold it back to
uncover the inside of the seat.
4.4 Adjusting harness strap length
Releasing − push and hold the adjuster (N), the
n lift the shoulder straps (Figure 5).
Tightening − pull the adjustment strap (G) at the front of the seat until the harness lies flat on
and fits tightly to the child's body (Fig. 6).
4.5 Adjusting the position of harness straps (Fig. 7)
When the child grows up, the shoulder straps must be removed from the metal buckle (on
the back of the seat) and inserted in a higher slot in the backrest and re-insert in the metal
buckle. Make sure that the straps are not twisted. Adjust shoulder strap height so that the
strap enters the car seat backrest just below the child's shoulders.
5.1 Fastening the child in the seat
•Place the child seat on a flat surface, and then set the handle in a stable position (Figure 2,
position 1).
• Loosen the shoulder straps (Fig. 5).
• Press the red button on the harness buckle (E) to release the straps.
• Set aside the two buckle fasteners.
• Place the child in the seat, then place the shoulder straps on the child's shoulders (Figure 8).
Note: Do not twist or cross the shoulder straps.
• Put together the two buckle fasteners, and then insert them in the buckle (E). A “click" sound
can be heard as a sign of locked buckle (Fig. 9). Note: the proper location of the buckle is near
your baby’s crotch rather than his/her belly.
• Pull the ad
juster strap (G) in the arrow direction to fasten the harness straps (Fig. 10). Ensure
that the shoulder straps fit well to the child's shoulders. Proper tension is provided if two
fingers fit in the space between the shoulder strap and the child's chest.
