Kinderkraft LULI, Руководство пользователя

Страница: 22 / 72

22
Safe use of batteries
Disposable batteries are not rechargeable. Do not mix different types of batteries or new
batteries with used ones. Insert the batteries according to the appropriate polarity. Dead
batteries should be removed from the product. Do not short-circuit the power poles. Batteries
may only be charged under adult supervision. The batteries should be charged outside the
device. Do not connect the power supply unit while there are batteries in the device.
Technical data:
Battery power supply: 4 pcs x AAA 1.5 V (not included)
Power supply via USB-DC cable (included): requires a power supply unit with USB-A port with
the following output parameters:
voltage 5.8 – 6.0V , minimum current 1A. Estimated run time
of the rocker on batteries (depending on battery type is a maximum of 5 hours).
Product description
no. Item description no. Item description
A Seat B Rocker foot
C Toy bar D USB-DC cable
Product assembly/disassembly:
Follow the fig. A and M.
The installation should take place on a soft ground that will not damage the surface of the
elements. All parts of the rocker (1, 2, 3, 4, 5, 6) should be carefully inspected after taking it out
of the box and make sure that none of them are damaged. Unfold the seat. Then connect the
frame components using the pins on both sides (fig. A). The clicking of the pins characterises
correct assembly. Then, slide the cover material over the seat frame and fasten the hook and
loop fasteners (fig. B). The picture (fig. C) shows a correctly assembled frame with cover
material. Next, slide the legs of the bouncer (3) onto the footrest with the control panel (2) and
fasten the four screws (6) with a cross-head screwdriver (which is not included in the product)
(fig. D). Thus assembled place the foot of the rocker on the ground. With both hands, grasp the
seat (fig. E) and gently push the seat pin into the hole in the foot. When the elements connect,
you will hear a characteristic sound (click). Attention! Adjust the shape so that the seat can
connect to the foot without obstacles or force. Slide the toy bar (4) onto the seat frame (fig. F).
To dismantle the product, press the metal button at the back of the foot of the rocker (Figure
G) and then, with firm move, separate the seat from the foot of the rocker.
To disassemble the
frame of the bouncer, slide the cover material off the frame of the bouncer (fig. H), then press
the pins and separate the frame parts with a firm movement (fig. I). Slide the cover material
from the frame.
The rocker has a rocking function. If you want the seat to swing to the sides,