Kinder HE MK2 Скачать руководство пользователя

Страница: 37 / 46

5.5

CLEANING

WARNING :

Before attempting any cleaning operation ensure that the fire has

been allowed to fully cool.

5.5.1

CLEANING THE TRIM AND PAINTED METAL PARTS

The extruded aluminimum trim that is supplied for use with this product must be

gently cleaned with a damp cloth only.

Abrasive cleaners, chemical cleaning

agents or any type of polish must never be used as damage to the paint may

result.

5.5.2

CLEANING THE FUEL BED

We do not recommend cleaning the fuelbed other than at annual service intervals.

If carbon or soot accumulates on the logs, this should be removed by carefully

brushing the fuelbed using a soft brush. For instructions on how to remove the

glass panel please see page 43.

The log set is made from a form of refractory

ceramic fibre and should be handled carefully to avoid generating dust, as

this may be harmful if inhaled. As with some fibrous materials, handling

fibrous materials without gloves could cause skin irritation.

The fuelbed should never be washed or exposed to any cleaning agents or

water

Any damaged parts must be replaced by contacting your dealer, whose details

may be found on the BFM Europe website, address on the rear page. The log

set must only be replaced with a genuine replacement and the fire must never be

run with a different log set fitted.

The log set must be carefully reassembled as stated in pages 38-42.

5.5.3

CLEANING THE GLASS PANEL

To clean the glass panel, first ensure that the fire is cool,

please note that the

glass panel will remain hot for a considerable period when the fire has been

switched off.

Remove the glass frame assembly from the product as described

on page 43. Use a clean damp cloth and ceramic glass cleaner to remove any

stains or deposits frm the glass panel. Do not using scouring pads as this may

scratch the surface finish of the glass panel.

PLEASE NOTE

:- The glass will require cleaning periodically. Condensation

produced by the products of combustion will create marks on the inside face of the

glass panel.

Содержание HE MK2















































Результаты поиска

Содержание HE MK2

Отзывы:

Похожие инструкции для HE MK2

Бренды по названию

Популярные бренды

Kinder HE MK2, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание HE MK2

Отзывы:

Похожие инструкции для HE MK2

Бренды по названию

Популярные бренды