![kincrome KP87006 Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/kincrome/kp87006/kp87006_manual_1967707009.webp)
9
UNIVERSAL BATTERY CHARGER &
MAINTAINER
12V 25 AMP
reach this within 24 hours, the safety timer protection will stop the unit from charging
and the RED Fault LED will start flashing and the BLUE Bulk LED will be ON.
• Absorption Charging - GREEN Absorption LED ON
Uses a constant Voltage while reducing the charging output current to ensure the battery
receives a full charge without overcharging the battery.
• Equalisation Charging - BLUE Bulk LED and GREEN Absorption LED both flashing
A well proven process that carefully overcharges the battery to restore it’s full capacity.
The Equalisation stage for CALCIUM Battery type selection is automatic. The Equalisation
stage for AGM&WET and GEL Battery Types only occurs if the initial start Voltage is below
11V DC
• Battery Analysis - GREEN Full LED ON
The battery analysis stage checks the condition of the battery after the charge cycle is
completed. If the battery Voltage drops too quickly during the analysis mode, this means
the battery is probably faulty. If the battery analysis failed, the GREEN Full LED flashing.
• Float Mode - Full GREEN LED ON
This stage allows you to keep the charger connected 24/7 to ensure your battery is well
maintained and kept 100% fully charged. Float mode will maintain the battery at a constant
13.6V DC.
• Long Term Maintenance - Full GREEN LED ON
During long term maintenance / float mode, the unit will apply a special pulse charge to
ensure the battery is kept in optimal condition.
4. Disconnecting the Battery charger from Battery
• If the Battery is out of the vehicle:
(1) Switch OFF and Remove the AC Pin Plug from the outlet.
(2) Remove the BLACK (-) lead and then the RED (+) lead.
• If the battery is still in the vehicle:
(1) Switch OFF and Remove the AC Pin Plug from the outlet.
(2) Remove the BLACK (-) lead from the vehicle chassis.
(3) Remove the RED (+) lead from the battery.
Note: Check electrolyte levels if possible after charging as they may need topping up with
distilled water (This does not apply to sealed maintenance free batteries).
KP87006 OzCharge_Manual_OC1225U_OC_2412U_V1.0.indd 9
18/04/2018 2:15 PM