![kincrome KP87006 Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/kincrome/kp87006/kp87006_manual_1967707004.webp)
4
UNIVERSAL BATTERY CHARGER &
MAINTAINER
12V 25 AMP
• Ultra lower power consumption (ECO Mode)
• Multi Stage:
1 - Qualification - Battery condition check
2 - Battery rejuvenation (recondition mode)
3 - Soft start charging
4 - Bulk charging
5 - Absorption charging
6 - Equalisation charging
7 - Battery analysis
8 - Float mode
9 - Long term maintenance pulse charge
• Automatic diagnosis and charge: On power up, the charger will automatically diagnose
the battery condition and determine if the rejuvenation mode (reconditioning) or charge
cycle is required.
• Patented battery rejuvenation technology: The charger has a unique and patented
rejuvenation feature which uses high Voltage equalising and peak pulse reconditioning
to repair sulphated batteries. This feature is fully automatic and depends on the internal
impedance of the battery.
• Can be left on 24/7 to ensure your battery is always maintained and fully charged:
The battery charger can be left unattended and left permanently connected all year
round. The intelligent charger will monitor the battery Voltage and will maintain it at
peak performance with a special pulse charge during long term maintenance.
• Short circuit and reverse polarity protection
• Heavy-duty and corrosion-resistant output connectors
• Crocodile clips and ring terminals: It comes with 2 different kinds of connectors,
crocodile clips and ring terminals. The ring terminals are part of the crocodile clips.
You’ll need and Alan key to remove the Crocodile clips from the ring terminal if you
require this connection type.
• Rapid Charge Mode: Uses maximum charging current to ensure the fastest charge
time. You may here the fan turn ON during this mode.
• Silent Charge Mode (Night Mode): Charges at a reduced charge rate so the cooling fan
is not required.
• Maintenance Mode: Ideal and recommended for long term maintenance charging or for
charging smaller batteries.
• Power Supply Mode: Press & Hold the Charge Rate button for 3 seconds to activate and
deactivate Power Supply Mode. When in Power Supply Mode, the Power Supply LED will
be ON.
RED
BLACK
RED
CONNECTION
IN
VEHICLE
(
NEGATIVELY
EARTHED
)
RED
BLACK
CONNECTION
IN
VEHICLE
(
POSITIVELY
EARTHED
)
BLACK
KP87006 OzCharge_Manual_OC1225U_OC_2412U_V1.0.indd 4
18/04/2018 2:15 PM