5
PRESSURE WASHER 1520PSI
Understanding Your Product
Auto Stop Motor Feature
The Pressure Washer motor is not designed to run continuously. The motor switches ON and OFF automatically when the trigger of
the Quick Connect Gun (10) is squeezed. Auto Stop motor will assist in using less electricity & prevent excessive wear of the motor &
pump assembly.
Nozzle Cleaning Pin
This cleaning pin can be used to dislodge any debris that may block the Pressure Washer nozzles from time to time.
Drawing from a Water Storage Device Terminology
This Pressure Washer includes a draw from bucket feature & allows for use of water from sources other than a mains pressure water
tap i.e. from a bucket or water tank.
Caution:
Do not use anything other than clean water (river, pond or muddy water containing sand granules will cause damage).
Failure to observe this may result in a premature failure and is not covered by the Kincrome warranty policy.
Draw from Mains Water Tap (Pressure Washer Input)
- Refers to drawing water from a standard mains supply water tap or water
tank pressure pump tap that can be located in or around your home/office/work area to supply the Pressure Washers
intake requirements (Fig 1).
Draw from Bucket (Pressure Washer Input) -
Refers to water being drawn from a standard bucket in or around your home/office/
work area to supply the Pressure Washers intake requirements (Fig 2).
Draw from Tank/Storage Device (Pressure Washer Input) -
Refers to water being drawn from a water tank or water storage device in
or around your home/office/work area to supply the Pressure Washers intake requirements with water (Fig 3).
Nozzles Supplied with the Pressure Washer
WARNING:
To prevent damage of the surface you are cleaning & to select the appropriate nozzle for your application,
always start cleaning your surface by using the lowest pressure possible. Insert the adjustable nozzle (13) and open the
nozzle fully by rotating anti-clockwise first and start cleaning well away from your surface to ascertain if the nozzle type &
distance from surface is appropriate for your cleaning needs.
Note:
Always test the selected nozzle/cleaning distance in an inconspicuous spot in case of any damage to the surface is experienced.
After testing the cleaning nozzle selected/distance of cleaning you can change nozzles & cleaning distance as required based on your
cleaning application.
Note:
Any damage caused to your surface due to pressure cleaning will not be covered by Kincrome.
Your Pressure Washer comes complete with 2 assorted cleaning nozzles and a high pressured detergent dispenser. Each nozzle
delivers a specific cleaning spray pattern for a particular cleaning application.The size & shape of the cleaning nozzles determine the
Pressure Washers output capacity. The different output capacities will deliver different cleaning results.
Nozzle Selection Guide
Adjustable Nozzle (13):
This nozzle allows the user to adjust the Pressure Washers output from a tight jet of water (which is
extremerly powerful and ideal for cleaning hard surfaces such as concrete) to a wide spray (which is quite gentle, ideal for cleaning
large surfaces)(Fig 4).
Note:
DO NOT use this nozzle when adjusted to a tight jet on soft materials such as timber!
(Fig 1)
(Fig 2)
(Fig 3)
