Handle Installing
• Position the trolley side handle behind the
holes on the trolley.
• Attach with (4) bolts and washers and
tighten with an adjustable wrench.
Note:
The side handle can be mounted
to either side of the trolley.
Castor Installing (If applicable)
• Be sure the drawers are locked and lay
the trolley on its side.
• Secure castors to the unit using the
12mm bolts provided.
• Tighten with a 12mm spanner or
5mm hex key.
• Repeat this process for the castors on
the opposite of the trolley.
• Return the trolley to its upright position.
Caution:
Do not over tighten the bolts.
Caution:
Both locking castors must be fitted
to front of trolley.
Removing the Drawers
• Fully extend the empty drawer.
• Push up the right grey release lever while
pushing down the left grey release lever.
• Pull the drawer outward until it is released
from the drawer slide.
Re-Inserting The Drawers
• Extend the drawer slides.
• Insert the brackets on each side of the
drawer into the slots on the slides, being
careful that they are properly positioned.
• Once properly inserted, completely close
the drawer to set the slides in their proper
positions.
MAINTENANCE
• Periodically tighten all hardware
• Periodically lubricate castors
• Lubricate the slides twice a year
• Lubricate the lock with graphite annually
• Use a damp Microfibre cloth to clean all surfaces
Assembly Instructions
2
Push up the
right grey release lever
Pull down the
left grey release lever
1
1
2
2
3
3
4
4
TOOL TROLLEY
7 DRAWER WIDE BODY
K7799
