background image

4

500KG ENGINE SUPPORT BAR

OPERATING THE ENGINE SUPPORT BAR 

 

WARNING! 

Any engine being supported by an engine support bar creates a potentially hazardous working environment. 

 

 

Never place any part of your body beneath an engine supported by an engine support bar.  

 

            

 

Work should only be attempted on the removed engine once it is no longer supported by the crane, either  

 

securely attached to an engine stand or other suitable supporting device.

1. 

With support bar properly assembled, place the support bar across the engine bay with the support brackets (5) flush against 

 

channel, do not place on panel, or any other surface which cannot hold the intended weight of the engine. 

Note:

 Some Vehicles are fitted with “Crumble Zones” in the channel. DO NOT install this engine support bar where there are 

 

crumble zones fitted as damage may occur. 

2. 

Attach Support Chains (4) to the Engine and Support beam (1) making sure the device is securely attached to the 

 

engine and is suitably rated to hold the weight of the engine.

3. 

Slowly Twist grip handles (2) evenly on both sides.  Rotate grip handles (2) clockwise until Support Bar just begins to support  
the weight of the engine.

4. 

Inspect engine securing device making sure it is properly attached to the engine.

5. 

Undo engine mount or perform other repair. Slight adjustment of the grip handles (2) maybe required to maintain engine  
position after other fasteners are loosened or removed.

6. 

Never leave an engine suspended by an engine support bar – the product is intended for short term use during repair.  
As soon as is practicable engine should repaired and engine support bar removed.

7. 

NEVER work under an engine supported by an engine support bar.  Never place and part of you body under an engine  
supported by a Support bar. 

MAINTENANCE AND STORAGE  

Lubricating 

a. 

Moving parts on engine support bar should be lubricated occasionally with a light machine oil to maintain efficient operation.  

 

Cleaning

a. 

Engine Support Bar should be wiped clean with soft cloth only. Do not use gasoline, kerosene, or other such solvents or 

 

any abrasive cleanser.

OFFICE CONTACT DETAILS

     

 Phone: 

1300 657 528

      

Fax: 

1300 556 005

      

Email:

 [email protected] 

      

Website:

 www.kincrome.com.au

CARING FOR THE ENVIRONMENT 

When a tool is no longer usable it should not be disposed of with household waste, but in an environmentally friendly way. 
Please recycle where facilities exist. Check with your local council authority for recycling advice. 

Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled material decreases pollution in 
the environment. Please recycle packaging where facilities exist. Check with your local council authority for  
recycling advice.

Please Note: 

Kincrome reserve the right to change spare parts without notice. 

Отзывы: