3. CHARGING
4. OPERATION
4.1. Direct the lens away from your eyes before switching on. Toggle the
lamp between 3W end LED, high power SMD, low power SMD and
OFF using the push switch on the handle (Fig.1B).
4.2. Suspend the lamp by the hooks. When the light is hanging from one
hook it can be rotated through 360° for more precise positioning.
4.3. Alternatively use the integral magnets to attach the lamp to any
ferrous metal surface.
IMPORTANT WARRANTY INFORMATION:
The battery fitted to this cordless tool is considered to be a
consumable item and its ability to accept charge will reduce over time.
We will warranty it against mechanical and electrical defect for a
period of one year - this does not cover fair wear and tear. If the
battery is not properly charged before first use, or regularly
conditioned, its capacity will diminish. Under these circumstances we
will not replace the battery even if it is less than one year old.
Note: Fully charge the lamp before first use.
Note: The Lithium battery does not suffer from memory effect and once fully
charged may be stored for up to six months without another charge.
3.1. Connect the charger into the charge socket on back of the lamp
(Fig.2A). Plug into power supply and turn on, the charging LED
(Fig.1A) on the lamp will light RED to show charging has commenced.
3.2. When the battery has fully charged the LED will turn GREEN.
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which is
compatible with the environment.
WEEE Regulations
Dispose of this product at the end of its working life.
When the product is no longer required, it must be disposed
off in an environmentally protective way. Contact your local
solid waste authority for recycling information.
Battery Removal
Remove the 6 screws on the back of the lamp. Remove the
back casing, and disconnect the wiring to the circuit board.
Remove the two battery mounting screws. Dispose of battery
according to local government guidelines.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 1300 657 528 and leave your full name and address, including postcode.
fig.1
fig.2
Li-ion
Warranty given by Kincrome Australia Pty Ltd of 3 Lakeview Drive, Carib-
bean Park, Scoresby, Victoria (Tel 1300 657 528). If this product has ma-
terials or workmanship defects (other than defects caused by abnormal
or non warranted use) you can, at your cost, send the product to place of
purchase, an authorised Kincrome service agent or one of Kincromes ad-
dresses for repair or replacement. Your rights under this warranty are in addition to any
other rights you have under the Australian Consumer Law or other applicable laws. Our
goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and compensation for any
other reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure. For further details please visit www.kincrome.com.au or call us.
Lamp Charge
Indicator
(A)
360º
rotating
hook
Charging
socket
(A)
Vertical
Magnet
Horizontal
Magnet
On/Off
switch
(B)
NATIONAL DISTRIBUTION & SHOWROOM
3 Lakeview Drive, Caribbean Business Park
Scoresby, Vic. 3179, Australia, P.O Box 135,
Ferntree Gully, Vic. 3156, Australia
CUSTOMER SERVICE CENTRE
Phone: 1300 657 528
Fax: 1300 556 005
Email: [email protected]
Internet: www.kincrome.com.au
