Kinco 3M2280N, Руководство пользователя

Страница: 24 / 34

User Manual
6
Chapter 3 Product Parameters and Installation
3.1 Product Parameters
Please learn carefully the driver parameters before use. Make sure the power supply and
operating environment conform to relevant requirements.
Table 1 Electrical Specifications
Parameter
Description
Input voltage
3M2280N: Single-phase 220V AC +/-15%
(50Hz)(187VAC~253VAC)
Phase
current(peak,
unit: A)
2.8, 3.2, 3.6, 4.0, 4.4, 4.8, 5.2, 5.6, 6, 6.4, 6.8, 7.2, 7.6 8.0
Micro step(unit:
pulse/rev)
400, 500, 600, 800, 1000, 1200, 1500, 2000, 3000, 4000, 5000,
6000, 10000, 20000
Input signal
Three control signal ports: PLS(CW)/DIR(CCW)/FRE; current
range: 6 ~16 mA
Control signal
input method
PLS+DIR; CW/CCW
Output signal ERR, open collector output, max current: 10 mA.
Protection Over-voltage, under-voltage, short circuit, and overheat protection
Absorbing
circuit*
Need customize, used to absorb the energy feed back by the
motor
Table 2 Operating Environment
Cooling method Forced air cooling
Environment
Operation
environment Avoid the environment with great amount of
metallic powder, oil mist, or erosive gases.
Operation humidity <85%, RH (non-condensing or water drops)
Operation
temperature
0

C ~ +40

C
Storage temperature -20

C ~ +70

C
Weight (net) 1.5Kg
Dimensions 201mm×147mm×66mm
Ingress protection IP20
3.2 Description of Wiring Terminal
Wiring terminals of the driver are divided into three types: control signal port, motor power
cable port, and power input port. Control signal port can receive differential signal,
single-ended common-cathode and common-anode signals, and can prevent the
interference of ambient environment on the driver with the built-in high-speed optocoupler.
The twisted pairs are recommended as signal lines for enhanced interference immunity in
environments with strong electromagnetic interference. The definitions of the driver ports
are detailed below: