8 Port / 16 Port / 24 Port / 32 Port
User Manual
- 9 -
Closing the console
Close the LCD display panel and the power automatically shut down.
Push the release catch in the direction of the arrow; pull the LED panel all
the way in until it automatically locks up.
2-1.6 unlocking the console
LED OSD Configuration
The LED OSD allows you to set up and configure the LED display
.
Buttons
Functions
MENU SELECT
Press this button invokes the menu function and brings up
the main menu.
EXIT/AUTO
Press this button exits the current menu and returns to the
previous menu or presses this button exits the LED OSD.
Press AUTO for automatic configuration.
SL-/SL+
Press this button moves your menu to make corresponding
adjustment.
LED state
Green :running
Red: power off or access nonstandard VESA signal
Flash green
：
energy saving mode or no signal
Table 2-1.7 adjust the monitor
Press AUTO if the screen migrates after power on or under other circumstances, then
the screen auto configure to its best display state.
(It might can’t be adjusted to its best
state if part of the display mode is not standard VESA mode, if so return back to OSD
menu to RESET, then it will back to normal.
We suggest our customers to set up the display mode at 1920x1080, refresh rate at
60Hz.
