HD1104
User Manual
3
Installation Instructions
Before installation, make sure all the devices that to be connected are power off.
1
）
Connect the monitor, USB keyboard and mouse to the local console port on the device
(see ① in below figure).
2
）
Connect the PC to the KVM Switch with HDMI cable (see ② in below figure).
3
）
Connect the power adapter to the KVM power port (see ③ in below figure).
4
）
Power on the PC to switch via front panel pushbuttons, keyboard hotkeys and infrared
remote control.
5
）
If a separate speaker or microphone is used, connect the speaker or microphone to the
audio port on the KVM device (see ④ and ⑤ in above figure).
6
）
Connect the USB peripherals to the USB port (see ⑥ in above figure).
*If the console monitor has a built-in speaker and supports audio through the HDMI
connector, you do not need to use a separate speaker.
