
OIL & WATER VALVES
Installation, Operation & Maintenance Guide
21
www.kimray.com
Model: TREATER / DUMP
ASSEMBLY
13 Diaphragm Assembly
Flip Diaphragm Plate over and place Diaphragm on top.
Place Disc onto Diaphragm.
Place rubber Seat into Disc.
NOTE:
Use a flat head screw driver to work the Rubber Seat into
place.
Insert Pivot into Ratio Plug.
Insert into Seat.
Insert into Disc.
Insert into Diaphragm.
Insert into Diaphragm plate.
See Fig. 13-1
Diaphragm
Plate
Diaphragm
Disc
Rubber
Seat
Ratio
Plug
Pivot
CAUTION:
DO NOT OVER TIGHTEN, can tear Gasket.
Fig. 13-1
Fig. 13-2
Fig. 13-3
Place pivot on ratio plug
Be sure grooved side faces toward seat
Take wrench and tighten Pivot
See Fig. 13-2
Place Diaphragm Assembly on Body
See Fig. 13-3