Kimoto Kimosetter 340, Руководство пользователя, Страница: 18 / 107

19
for
Windo
ws and Macint
osh
Check the SCSI device number
Make sure the device number for the printer is set correctly.
Each SCSI device connected to the computer must have a
unique SCSI device number. If two devices have the same
device number, they will not work properly. (The printer device
number is set to 6 at the factory. To change the device number,
use the DIP switches next to the connector. For more details,
refer to “DIP switches” in the Chapter 4 - Appendix.)
Power cord connections
1. Plug the power cord into the power cord socket on the
printer. Make sure that the power cord is securely seated
in the socket.
2. Plug the free end of the power cord into a suitable AC
power source (such as a wall socket).
Caution
•
When plugging the power cord into the printer, make sure
you push in the plug all the way, going beyond the halfway
point where the plug comes to a soft stop.
•
Power to the printer is completely cut off only when the cord
is unplugged. Place the printer where you can easily unplug
it from the wall socket. Also, pull the plug and not the cord
when unplugging the printer.
Power cord socket
Power cord