Kimo KISTOCK 320 Series, Руководство пользователя

Страница: 19 / 20

8 Accessories
Accessories References Illustrations
1 double AA lithium 3.6 V battery
2 batteries are required for class 320
dataloggers
KBL-AA
Safety lock wall mount with padlock KAV-320
Wired extension for class 320 KISTOCK probes
In polyurethane, 5 m length with male and female mini-DIN
connectors
Note: several extensions can be wired in order to obtain up to
25 m cable length
KRB-320
Configuration and data processing software
KILOG software allows to configure, save and process your data
in a very simple way.
Software only: KILOG-3-N
Complete set (so 1
USB cable): KIC-3-N
Data collector
Collects up to 20 000 000 points from one or several KISTOCK
directly on-site. Results restitution on PC of realised datasets
KNT-320
USB micro-USB cable which allows to plug your KISTOCK
datalogger to your PC
CK-50
Neck size hand strap KDC
Only the accessories supplied with the device must be used.
9 Troubleshooting
Problem Probable cause and possible solution
No value is displayed, only the icons are present.
The display is configured on “OFF”. Configure it on “ON” with
the KILOG software (see page 16).
The display is completely off* and there is no
communication with the computer.
The battery has to be replaced. (see page 17).
The display indicates “- - - -” instead of the measured
value.
The probe is disconnected. Plug it again to the datalogger.
There is no Bluetooth communication with the
datalogger. The Bluetooth activation is on OFF. Reconfigure Bluetooth on ON
with the KILOG software (see page 16).
* Only with the KT 320 and KTT 320 KISTOCK.
Troubleshooting
19