Kimo FrigoPack EC FU+/12 Скачать руководство пользователя страница 3

Страница: 3 / 3

www.frigokimo.com

The setting-up of this inverter can be done without SD memory card, as usually only 3 parameters are to be

set: Maximum compressor current (parameter 61) as well as maximum and minimum motor frequencies

(parameters 62 and 64). You may find these parameters in the menu COMPRESSOR SETUP.

2. First set-up

Caution:

When setting the value of parameter 61, keys "

Green

" and "

Red

" are flashing permanently

(configuration mode). Confirm your setting with key "OK" and then press "

Red

" shortly in order

to leave the configuration mode!

KIMO RHVAC Controls GmbH

| Hüttendorfer Weg 60 | D - 90768 Fürth, Germany

01117.144-472/08

Connect start command (cable to terminal X13:2) to start the system!

Please contact our

applications team for any

questions in planning or

commissioning under

tel +49 (0) 9131 – 934570

Содержание FrigoPack EC FU+/12

Страница 1: ...This is an abbreviated and customized version with recommendations for a first setup of this product Please refer to the document Planning Guide FrigoPack EC FU 12 for detailed information FrigoPack E...

Страница 2: ...l X10 3 Remove start command cable to terminal X13 2 Connect main power supply 1 2 Keypad functionality 1 3 Menus Selection of user level for first set up To start commissioning the user level TECHNIC...

Страница 3: ...t up Caution When setting the value of parameter 61 keys Green and Red are flashing permanently configuration mode Confirm your setting with key OK and then press Red shortly in order to leave the con...