CAUTION:
Use of very slow speed is recommended only for
beginning a cut. Prolonged use at very slow speed may damage your
saw.
CUTTING
WARNING:
•
Always use eye protection. All users and bystanders must wear
eye protection.
•
Exercise extra caution when cutting towards operator. Always
hold saw firmly with both hands while cutting.
Before cutting any type of material, be sure it is firmly anchored or
clamped to prevent slipping. Place blade lightly against work to be cut,
switch on saw motor and allow it to obtain maximum speed before
applying pressure. Whenever possible, the saw shoe must be held
firmly against the material being cut. This will prevent the saw from
jumping or vibrating and minimize blade breakage. Any cuts which
put pressure on the blade such as angle or scroll cuts increase
potential for vibration, kickback, and blade breakage.
WARNING:
•
Use extra caution when cutting overhead and pay particular
attention to overhead wires which may be hidden from view.
Anticipate the path of falling branches and debris ahead of time.
•
Inspect work site for hidden gas pipes, water pipes or electrical
wires before making blind or plunge cuts. Failure to do so may
result in explosion, property damage, eletric shock, and/or
serious personal injury.
