BATTERY INSTRUCTIONS
CAUTION: Only use genuine KIMO batteries.
Use of non-genuine KIMO
batteries, or batteries that have been altered, may result in the battery
bursting causing fires, personal injury and damage. It will also void the
KIMO warranty for the KIMO tool and charger.
MAINTAINING MAXIMUM BATTERY LIFE
1.
Charge the battery cartridge before completely discharged.
Always stop tool operation and charge the battery cartridge when you
notice less tool power.
2.
Never recharge a fully charged battery cartridge. Overcharging
shortens the battery service life.
3.
Charge the battery cartridge with room temperature at 10 °C -
40 °C (50 °F - 104 °F). Let a hot battery cartridge cool down before
charging it.
4.
Charge the battery cartridge if you do not use it for a long period
(more than six months).
TOOL/BATTERY PROTECTION SYSTEM
The tool is equipped with a tool/battery protection system. This
system automatically cuts off power to the motor to extend tool and
battery life. The tool will automatically stop during operation if the
tool or battery is placed under one of the following conditions:
Overload protection
When the battery is operated in a manner that causes it to draw an
abnormally high current, the tool stops automatically. In this
situation, turn the tool off and stop the application that caused the
tool to become overloaded. Then turn the tool on to restart.
Overheat protection
