Assembly Instructions
Guide
™
1
Part 2824569, Revision A
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Care.
Guide Desk Assembly
(TFL Hinged Door/Open File Pedestal)
Tools Required
•
Drill
Tape Measure
•
7/32” & 5mm Allen Wrench
•
#2 Phillips Head Bit Drive
•
1/8” Drill Bit
Hardware Required for Guide Desk with TFL
Pedestals
(1) – Worksurface (22”x48”, 22”x60”, or 22”x72”)
(1) – Podium Surface (54K1916WS*)
(1) – T-Blade Base (54K2028CFTM)
(1) – T-Blade Pedestal Base (54K2009CFTM)
(1) – Podium Column (54K1202PCP)
(1) – Resin Modesty Panel (20”, 32”, or 44”)
(1) – Undersurface Pedestal (TFL)
(2) – 3/8-16 x 1.5” PH Hex Machine Screws
(8) – #10-1.75” PHP Wood Screws
(18) – #10-0.75” PHP Wood Screws
(4) – #10-1” PHP Wood Screws
Installation
1.
Place worksurface upside-down on a desk height
nonmarring surface.
2.
Place the rectangular plate, included with the Pedestal,
squarely on the underside of the surface using the location
seen in
Figure 1
. Make sure the countersink is facing
outward, as this is important to later attach the podium.
3.
BEFORE pre-drilling, it may be helpful to attach the
podium column to ensure the podium column mount holes
are centered with the column pass-thru hole. The column is
attached by using the two (2) 3/8-16 x 1.5” PH Hex
Machine Screws. It is recommended to let the end of the
worksurface overhang the edge of the surface you are
building the desk on. Using a 1/8” drill bit, pre-drill the
eight (8) holes that are in the boxed area in
Figure 1
as well
as the four (4) corner holes to a depth of a few millimeters.
4.
Attach the rectangular plate by driving eight (8) #10-1”
PHP Wood Screws through the eight (8) boxed holes and
into the underside of the worksurface.
a
If the podium column was attached to align the
metal plate, it can now be removed.
Figure 1
9
5
8
ൗ "
10 ¾”
