kim lighting Lightvault RGBW LTV81 Скачать руководство пользователя страница 2

Страница: 2 / 8

Lightvault

RGBW LTV81/LTV82 RGBW

Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS TO AVOID RISK OF FIRE OR INJURY!

WARNING: Fixtures must be grounded in accordance with local codes or the
National Electrical Code. Failure to take these steps may result in serious
personal injury. All electrical work should be done by a qualified electrician

SAFETY WARNING: DO NOT install these fixtures in submersible

installations such as fountains or swimming pools. Extreme caution

should be taken when installed in paved areas. MAINTENANCE: To maintain
light efficiency and prevent overheating, lenses must be kept clean and free
of dirt, dust, leaves, trash and mineral deposits from water. For optimum
performance a regularly scheduled maintenance program should be
followed. DO NOT operate luminaire with missing or damaged lens.

KEEP THIS SHEET FOR FUTURE REFERENCE.

CAUTION:

• To help maintain a clean, dry splice

compartment,

always apply sealant to

both conduit threads and molded

housing to seal.

(sealant not supplied.)

• When tightening gasketed splice cover

into bottom of molded housing, always

Torque screws to 25-30 in-lbs in a star

pattern.

• Make sure all electrical supply is

OFF

before starting fixture installation.

ALIGNMENT:

Fixture can be installed on

housings at 90° increments.Care must be

taken when installing the housing so

directional marker on lens frame can be

installed at a desired orientation.

• Refer to pour box Debris Shield for

proper alignment.

Tools Required:

RTV sealant,

3/16" tamper resistant hex wrench,

adjustable wrench or pipe wrench

FLAT LENS

FRAME (FF)

(4) 1/4-20

HEX SCREWS.

TORQUE SCREWS

TO 25-20 in-lbs.

COMPONENT

HOUSING

DEBRIS SHIELD

(4) 3/16" HEX

SCREWS

(6) 1/4-20

HEX SCREWS

TORQUE SCREWS

TO 25-30 in-lbs.

SPLICE COVER

GASKET

MOLDED

HOUSING

PIPE PLUGS

• 17760 ROWLAND STREET, CITY OF INDUSTRY, CA 91748 • TEL: 626/968-5666

PAGE 2

FLUSH MOUNTING:

For flush mounting when installing in
concrete, top edge of molded housing
should be

below concrete grade.

Содержание Lightvault RGBW LTV81









Результаты поиска

Содержание Lightvault RGBW LTV81

Отзывы:

Похожие инструкции для Lightvault RGBW LTV81

Бренды по названию

Популярные бренды

kim lighting Lightvault RGBW LTV81, Руководство по установке

Результаты поиска

Содержание Lightvault RGBW LTV81

Отзывы:

Похожие инструкции для Lightvault RGBW LTV81

Бренды по названию

Популярные бренды