Sirius Capacitor Module
–
User Manual
Model Number -7100-48-B-2C-M-SD-A-FL
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
18
6.
Software Configuration
To configure the
SiriusVIEW
application, please follow the steps below:
1.
Install the
SiriusVIEW
application on your computer.
2.
Connect the USB cable to the COMM connector USB slot to start communication and monitoring.
3.
Turn on the Sirius module by pressing the fault reset button.
4.
Wait till the LCD screen on the Module displays initial values.
5.
Double click on the
SiriusVIEW
application to execute it.
6.
When the login appears, enter the default username and password:
Default Username: admin
Default Password:123
7.
Select
SiriusVIEW
as shown below and left click.
8.
Enter Serial Port (COM) that Module is using at the beginning of application and select the
type of module from drop down menu.
Note!
Always turn OFF the Module when not in use because the Module is self-
powered. If left on, the self-discharge rate will increase.
