General Precautions
Avoid lengthy exposure to heat or cold Allow the scale to acclimate to normal room temperature before use
Allow sufficient warm up time
Turn the scale on and wait for a few minutes to allow the internal
components a chance to stabilize before weighing
Do not leave a load or weight on a scale
for a prolonged period of time.
Might damage load cell
Do not tamper with the scale yourself
This will void the warranty. Contact your local distributor or Kilotech
directly to properly repair your scale
Do not overload beyond the maximum
weight limit
Do not pull the plug by its cord when
unplugging
Do not use the scale near fire or
corrosive gas
Unless the scale is waterproof do not
spill water or immerse in water
Avoid placing the scale near a heater
It could cause a fluctuation to the indicator reading
Always make sure to use a Kilotech
approved adapter
Do not drop the scale or apply a sudden
shock
Do not drag the scale
Avoid exposing to other electromagnetic
devices
These devices emit RF and can cause unstable readings. If your scale
should perform poorly, try moving the scale to a different room or
location
Level the scale or make sure it is on an
even surface
A scale used on an uneven surface may provide an unstable reading
Scale should be used within stated
temperature
The scale should always be used in
an environment which is free from
excessive air currents, corrosives,
vibration and temperature or
humidity extremes.
