| KillDisk station overview |
13
Figure 6: Thecus chassis for five disk bays, front panel controls and display
Main Menu
Erase
From this select all or specific idle disks to initiate erase process. Use
Up
and
Down
buttons to make a selection
and press
ENTER
button to start.
Note:
Use
Erase Method
menu to select erase method or use software
on page 39
and
Chassis preferences
pages to select additional erase methods and attributes.
Examine
From this select all or specific idle disks to initiate examination process. Use
Up
and
Down
buttons to make a
selection and press
ENTER
button to start.
Note:
Use the software's
on page 41 dialog to select default examination
algorithm and other options.
Erase Method
From front panel menu you can select only limited but most used number of erase methods. For advanced erase
methods and other options please use:
on page 39 page in application preferences
dialog.
Automatic Mode
Automatic mode implies that disk erasure or disk examination (or both if set) will start automatically as soon as
disk is inserted in one of the bays.
Print Label
Select whether or not to print
erase labels
when erasing process is finished. For exact options use:
on page 46.
