Kilews SK-205LS, Руководство по эксплуатации и обслуживанию

Страница: 7 / 12



1) Whenever changing a bit, make certain the Forward / Reverse Switch is in the “ OFF “ position and tool
is unplugged.
2) Do not allow chemicals such as acetone, benzene, thinner, trichloroethylene ketone, or other similar
chemicals to come in contact with the screwdriver housing as damage will result.
3) Do not drop or abuse the screwdriver.
4) Do not adjust the torque setting higher than 8 on the torque scale.
5) There should be a tool rest interval when cycles three seconds or longer. This tool is intended for a
duty cycle of 1.0 sec on, 3.0 sec off.
6) Do not use this screwdriver for tightening wood screws. This is “ Metal Assembly Screw Driver ”
7) Do not operate the Forward / Reverse Switch the motor is running.
8) Whenever a tool is not being used, move the Forward / Reverse Switch to the “OFF” position and
unplug the screwdriver.
9) Don't touch For&Rew Switch during operating for keeping system from wrong judgement.
● Do not drop or abuse the tool.
● Whenever a tool is not being used, position the Power Switch to the “OFF” position and unplug the
power cord.
Operations Cautions
CAUTION