Kilews KTM-15, Инструкция по эксплуатации

Страница: 25 / 30

24
6.1 Data saving
Whenever press CLEAR key, the system will automatically clear the data, meanwhile, the data will be saved in the memory
according to serial number. The serial number is from 001 ~ 800 (no more than 800 datum) and the first data will be automatically
covered as new data is over 800
th.
6.1.1 Deleting the single data
Torque value can be deleted. The value of following will move ahead.
SITE VALUE Remark
001 10.9
002 11.1
003 13.0 Press “clear” to remove this value
004 11.1
005 11.2
「
1
」
Several tests later, datum will be kept in memory.
「
2
」
Please press the MEM/OUTPUT key when deleting the data is necessary. The
「
MEM
」
will appear on the LCD.
「
3
」
Taking advantage of UP/DOWN key searching for site, LCD will display “site” and “value”, the torque value will be
「
13.0
」
( blinking around 6 seconds) when choosing
「
003
」
.
「
4
」
Press
「
CLEAR
」
key, “ ” will be shown on the LCD, press CLEAR key again, delete is completed.
The following value will move ahead.
SITE VALUE Remark
001 10.9
002 11.1
003 11.1 The following value will move ahead
004 11.2 The following value will move ahead
005 ---
6.1.2 Delete the data range
「
1
」
Several tests later, datum will be kept in memory.
「
2
」
Please press the MEM/OUTPUT key when deleting the data is necessary. The
「
MEM
」
will appear on the LCD.
「
3
」
Taking advantage of UP/DOWN key searching for site, LCD will display “site” and “value”, the torque value will be
「
11.1
」
(blinking around 6 seconds) when choosing
「
003
」
.
「
4
」
Press
「
CLEAR
」
key, “
” will be shown on the LCD.
「
5
」
Taking advantage of UP/DOWN key searching for site, LCD will display “site” and “value”, the torque value will be
「
11.2
」
(blinking around 6 seconds) when choosing
「
004
」 .
「
6
」
Press the
「
CLEAR
」
key again , delete is completed. The following value will move ahead.
UP / DOWN CLEAR UP / DOWN CLEAR
※
SETTING
OK
6.1.3 Data output
「
1
」
Press MEM/OUTPUT first, LCD will display “MEM” and the last data is shown also.
「
2
」
Press MEM/OUTPUT again, LCD screen will display “ ”, choosing the initial site of output data. For example, the
005 data, press UP/DOWN key to choose
「
005
」
.
「
3
」
Press MEM/OUTPUT again, LCD screen will display “ ”, choosing the ending site of output data. For example, the
070 data, press UP/DOWN key to choose
「
070
」
.
「
4
」
Press MEM/OUTPUT again, LCD will display “ ”, means sites 005~070 have been output to USB.
MEM/OUTPUT MEM/OUTPUT UP / DOWN
MEM/OUTPUT UP / DOWN
※
PROCESSING