Kilews BC6P, Руководство пользователя

Страница: 8 / 10

BN Series
6
3.2 LED Display in setting mode and error code description :
Symbol Definition Description
Set Slow Start Time
1. Press
▲
+
▼
for 2 Sec, LED will display [RC]
2. Use
▲
or
▼
to increase or descrease slow start time
value from 0.0 to 9.9 sec
Set Slow Start
Speed
Level
1. Press
▲
+
▼
for 1 sec after set [RC] , LED will display [SP]
2. Use
▲
or
▼
to increase or descrease slow start speed level
from L0 (100%, Disable) or L1 to L9 (30%~90%)
Slow Start
Speed Level
1. When
[SP]
set to
[L1] ~ [L9]
, indicate the slow start speed
level.
No Slow Start
Function
1. When [SP] set to [L0] , disable slow start function
Under Voltage
Protection
1. Screwdriver will stop when the operation voltage is lower.
2. LED will display [E3] to indicate Over voltage protection.
3. Screwdriver will disable 10 sec then automaic recovery
Over Temp.
Protection
1. Screwdriver will stop when the operation temperature is
higher.
2. LED will display [E4] to indicate Over temperature
protection.
3. Screwdriver will disable 10 sec then automaic recovery
Stall Protection
1. Screwdriver will stop when motor is abnormal stalled after
start.
2. LED will display [E5] to indicate stall protection.
3. Screwdriver will disable 10 sec then automaic recovery
Push plate Error
1. Screwdriver will stop when push plate change between
motor running.
2. LED will display [E7] to indicate abnormal operation.
3. Switch push plate back to recovery
Brake Error
1. Screwdriver will stop when the abnormal brake signal
appeared before start.
2. LED will display [E8] to indicate abnormal brake error.
3. Check and fix the brake mechanism to recovery
Memory Error
1. Screwdriver will stop when the internal flash memory fail.
2. LED will display [E9] to indicate internal flash memory
error.
3. Screwdriver will disable 10 sec then automaic recovery