Kikusui TOS8030, Руководство по эксплуатации

Страница: 50 / 56

48 Specifications TOS8030
9.2 Other Functions
9.3 General Specifications
Remote control
Connector 5-pin DIN connector on the rear panel
Control available Start/stop of testing
Optional devices connectable
Remote control boxes: RC01-TOS and RC02-TOS
High-voltage test probes: HP01A-TOS and HP02A-TOS
Signal I/O
Connector 14-pin screw-less terminal on the rear panel
Status signal output
Output of a READY signal / H.V ON signal / PASS signal / FAIL signal
/ PROTECTION signal
Make-contact signal (contact rating: 1 A/30 Vdc)
INTERLOCK input terminal A PROTECTION state is invoked when the terminals are open.
Environment
Operation environment Indoor use, Overvoltage Category II
Specifications-
assured range
Temperature 5
°
C to 35
°
C
Relative humidity 20% to 80% (with no dew condensation)
Operating range
Temperature 0
°
C to 40
°
C
Relative humidity 20% to 80% (with no dew condensation)
Storage range
Temperature -40
°
C to 70
°
C
Relative humidity 90% or less (with no dew condensation)
Altitude Up to 2000 m
AC input
Nominal input rating
(Input voltage range) 220 V (200 V to 240 V) or 100 V (90 V to 110 V),
50 Hz or 60 Hz
Power consumption
At no-load
(in READY state)
10 VA or less
At rated load 50 VA maximum
Insulation resistance
AC INPUT to
chassis
30 M
Ω
or more (at 500 Vdc)
Withstand voltage
AC INPUT to
chassis
10 mA or less when 1390 Vac is applied for 2 seconds
Earth continuity 25 Aac/0.1
Ω
or less
Dimensions (largest section) 160 (170) W x 132 (155) H x 230 (270) D mm
Weight Approx. 6 kg
Accessories
•
High-voltage test leads TL01-TOS (approx. 1.5 m): 1 set
•
Power cord: 1
•
INTERLOCK jumper: 1
•
Operation Manual: 1 copy