Kikusui tos6200, Руководство по эксплуатации

Страница: 22 / 157

2-8 TOS 6200/6210
2 .7 Connecting the T est L eads
• While this product generates voltages as low as 6 V or less AC , it carries a
maximum current flow of 30 A . A lways check to make sure that no con-
nections are loose. Loose connection will result in overheating of the
OUT P UT terminals or the D UT (Device U nder T est), which may then result
in burns or injury.
• N ever connect the voltage measurement cable (thin wire) of the supplied
test leads or optional test probe to the OUT P UT terminals. T he nominal
sectional area of this wire is inadequate for such currents, and burning
may result.
• T his product carries a large current and consequently generates a strong
magnetic field. Make sure that no articles that may be affected by mag-
netic fields are located near the test leads or current output lines.
For example, images on a CRT positioned close by may be significantly
distorted.
2 .7. 1 S upplied T est L ead TL11 - TOS / TL12 - TOS
1. R emove the short-circuit bars connecting the OUT P UT and SA MPL IN G
terminals.
W ARNIN G
C AUTION
TOS 6200
T ake care not to get your finger
caught between the output
terminals when turning the knobs.
TOS 6210