manualshive.com logo in svg

Kikusui TOS5200, Руководство пользователя, Страница: 24 / 82

Поделиться
Скачать
Kikusui TOS5200 Скачать руководство пользователя страница 24

24

TOS5200

Connecting to the Device under Test (DUT)

Using test leads

1

Check that the POWER switch is off and that the DANGER LED is off.

p. 62 

2

Check that there are no tears or breaks in the test lead insulation.

3

Raise the front-panel LOW VOLTAGE terminal’s cable lock, and then
connect the low-voltage test lead (black).

4

Lower the cable lock to secure the lead in place.

WARNING

Risk of electric shock. During testing (while the TEST LED or DANGER LED is lit), 
never touch the HIGH VOLTAGE terminal, test leads, and DUT.

WARNING

Risk of electric shock.

• Parts of the included test leads near the alligator clips 

protrude from the vinyl insulation when the wires are 
connected. These parts are dangerous. Never come 
close to these parts during testing.

• If connections are incomplete, the entire DUT may be 

charged to a high voltage. This is dangerous, so be sure 
to connect the DUT correctly.

• Be sure to connect the low-voltage test lead (black) first.

Never come close to this area 
during testing.

OUTPUT

DANGER

TOS5200

Off

Off

POWER

See

HIGH VOLTAGE

Low-voltage test lead (black)

Raise the cable lock.

Low-voltage test lead (black)

Lower the cable lock.

Содержание TOS5200



















































































Отзывы:

Нет отзывов