Kikusui PMX32-3DU, Руководство пользователя

Страница: 49 / 104

PMX_MULTI
User’s Manual
49
Basic Functions | CONFIG Settings
CF30 to CF33 (
IP1
to
IP4
) IP address display
These parameters display the set IP addresses.
To set a fixed IP address, set it from the panel (CF42 to CF45) or from the Web browser interface. When
you access the PMX through a Web browser, do so under conditions in which a DHCP server or AUTO IP
can be used.
For details on the Web browser interface, see the Communication Interface Manual on the included CD-
ROM.
CF34 to CF36 ( HA1 to HA3 ) MAC address display
These parameters display the set MAC addresses.
MAC addresses are set to 00.0F.CE.xx.xx.xx (where x is a hexadecimal number between 0 and F).
CF40 (
BOOT
) LANsetting reset (LCI/ dEF) or apply (APPL)
Sets whether to reset or apply the LAN interface settings.
Then, press SET twice to execute the reset or application.
If you select to reset the LAN interface settings (
LCI
(LCI)/
DEF
(Default)), the security password will be
cleared, and the PMX will be in a security-disabled state.
If the LAN LED turns red
(p.9)
, set the settings again.
For details on the LAN interface settings, see the “Communication Interface Manual” on the included CD-
ROM.
Parameter
number Display Description
CF30
0
to
255
0 to 255 First octet of the IP address
CF31
0
to
255
0 to 255 Second octet of the IP address
CF32
0
to
255
0 to 255 Third octet of the IP address
CF33
0
to
255
0 to 255 Fourth octet of the IP address
Parameter
number Display Description
CF34 00.0F 00.0F First and second octets of the MAC address
CF35 CE.XX CE.xx Third and fourth octets of the MAC address
CF36
XX.XX
xx.xx Fifth and sixth octets of the MAC address
Display example of the MAC
address "00.0F.CE.11.22.33"
CF34: 00.0F
CF36: 22.33
CF35: CE.11
CV
V
s
CC
A
s
%
%
CV
V
s
CC
A s %
%
CV
V
s
CC
A s
%
%
Display Description
LCI
LAN Configura-
tion Initialize Resets the LAN interface settings (to their factory default values)
DEF Default Resets the LAN interface and host name settings (to their factory
default values)
APPL
Apply The LAN interface is restarted, and the CONFIG settings are
applied.