Kikusui PLZ1004WH, Руководство пользователя

Страница: 81 / 158

PLZ-4WH
81
4
Sequenc
es
Executing, Pausing, and Stopping Sequences
After you have finished configuring the sequence, execute it.
Executing sequences
1
Make sure that the switching and short functions are off.
Make sure that the SW ON key light is off and that the short icon is not displayed. Even
if the light is on, when you enter the sequence execution screen, the switching and
short functions will be turned off automatically.
2
Press RUN/STOP (SHIFT+B) or PAUSE (SHIFT+C) to display the
sequence execution screen.
3
Turn the rotary knob to select the number of the program that you want
to execute.
To execute a normal sequence, select a program number from 1 to 10. To execute a
fast sequence, select program number 11.
4
Press RUN/STOP (SHIFT+B) to execute the selected sequence.
The sequence will be executed, and the measured values will appear on the display.
When the sequence is completed, a popup window appears on the screen .
5
Press ENTER to exit the sequence execution screen.
If a step’s PAUSE setting has been set to ON, the sequence operation will pause after the
step has been executed. To resume operation, press PAUSE (SHIFT+C).
Pausing a sequence
If you press PAUSE (SHIFT+C) while a sequence is being executed, the sequence pauses,
and the PAUSE screen appears.
To resume the sequence, press PAUSE (SHIFT+C) again.
If you press RUN/STOP (SHIFT+B) while the sequence is paused, the sequence will stop.
0.00
mA
0.000
V
0.000
W
CC
0.000
A SET
H 8.25A 65V
PROG No. 1
Pro g ram1
SEL PROG NO
RUN
No. 1:Pro g ram1
Memo
Press PREV (SHIFT+ )
to return to the previous
screen.
0.0000
A
0.00
V
0.00
W
CC
0.000
A
SET
STOP CONT
No. 1:Pro g ram1
H 8.25A 65V
PAUSED