Kikusui PLZ-3WH Series, Руководство по эксплуатации

Страница: 86 / 172

4-46
Chapter 4: Operating Procedure
15.00A 5.0V 75.0W
CC S3, P03, L0000, 0002
15.00A 5.0V 75.0W
CC S3, P03, L0000, 0002
Sequence: 1 :NI
P01, L0001, C2, E16
To pause or forcibly stop executing the sequence, use the following procedures. The pause function is not available in
the fast-speed sequence mode.
Pause and resumption
(1) When you press the [PAUSE] key during execution
of the sequence, the sequence is paused with its
contents still appearing on the display, and the
sequence number stops blinking.
(2) To resume the paused sequence, press the [PAUSE]
key again. The sequence number blinks and the
sequence starts.
NOTE
The [PAUSE] key operation is accompanied by a time delay. After the pause mode is canceled, the
remaining part of the paused step is executed and the process enters into the next step.
Forced stop
When you press the [STOP] key during execution of a
sequence, the sequence is forcibly stopped and the
process ends. The display returns to its original status.