Kikusui PLZ-3WH Series, Руководство по эксплуатации

Страница: 82 / 172

4-42
Chapter 4: Operating Procedure
(17) Using the [SHIFT] + [ ] ( △ ) keys, go to step 03 of
program 3 and create it.
(18) Press the [ESC] key three times to return to the
program-number entry menu of step (1) above, and
conduct steps (1) through (9) to create step 01 of
program 16.
(19) Press the [ESC] key five times to return to the first
Sequence Menu.
● ● ● ● ● Confirming, changing, deleting, and adding steps
This example explains how to check the program and step contents, delete steps from the program, and add steps to the
program.
Confirming the program and step contents:
(1) Select “1: Edit Program” from the Edit Menu and
press the [ENTER] key.
(2) Specify the program number in which the target step
is contained, using the jog control, and press the
[ENTER] key. This allows you to check the contents
of the program. When the step number is specified
with the jog control or [ ] and [ ] keys, you can
check the contents of the step.
(3) Pressing the [ENTER] key displays the menu one
hierarchy below the Edit Menu. After you select “1:
Modify” and press the [ENTER] key, the step
contents can be edited. (You can edit the step
contents using the same operating steps as in the edit
procedure, beginning from step (8).)
Deleting steps:
(1) Select “3: Delete” from the Edit Menu with the jog
control or arrow keys and press the [ENTER] key.
The number on the right of “Delete” shows the first
number of the steps you want to delete. The step
number can be changed with the [SHIFT] + [ ] ( △ )
keys or [SHIFT] + [ ] ( ▽ ) keys.
The lower field shows the number of steps to be
deleted in sequential order, starting from the step
number specified in the upper field. Set the number
of steps with the jog control.
＞
1: Edit
2: Run
N003 S 0.50A
50 ms • L • •
N001 S 0.50A
1 ms • • • •
Program: 01 :NI
001 Step [T009]
N001 S 0.50A
50ms • • • •
N001 R 10.00A
＞ 1: Modify
Delete: 001
How many Steps? 1