Kikusui PCZ1000A, Руководство по эксплуатации

Страница: 23 / 100

PCZ1000A
2-3
2
Unpacking and Installation
●
Avoid locations where the PCZ1000A is exposed to high temperatures or
direct sunlight.
Do not locate the product near a heater or in areas subject to drastic temperature
changes.
Operating temperature range: 0
°
C
to 40
°
C (32
°
F to 104
°
F)
Storage temperature range: -25
°
C
to 70
°
C (-13
°
F to 158
°
F)
●
Avoid humid environments.
Do not locate the PCZ1000A in a high-humidity environment near a boiler,
humidifier, or water supply.
Operating humidity range: 20 %rh to 85 %rh (no condensation)
Storage humidity range: 90 %rh or less (no condensation)
Condensation may occur even within the operating humidity range. In that case,
do not start using the product until the location is completely dry.
●
Be sure to use the
PCZ1000A
indoors.
This PCZ1000A is designed for safe indoor use.
●
Do not place the PCZ1000A in a corrosive atmosphere.
Do not install the product in a corrosive atmosphere or one containing sulfuric acid
mist or the like. This may cause corrosion of various conductors and imperfect contact
with connectors, leading to malfunction and failure or, in the worst case, a fire.
●
Do not locate the PCZ1000A in a dusty environment.
Dirt and dust in the product may cause electrical shock or fire.
●
Do not use the PCZ1000A where ventilation is poor.
Secure adequate space around the product so that air can circulate around it.
Allow at least 20 cm of space between the air inlet/outlet and the wall (or
obstacles).
●
Do not place any object on the PCZ1000A.
In particular, do not place heavy objects on the product as this could result in a
malfunction.
● Do not place the PCZ1000A on a tilted surface or in a location subject to
vibrations.
If placed on a non-level surface or in a location subject to vibration, the product
may fall, resulting in damage and injury.
●
Do not stand the PCZ1000A in upright position.
It may cause injury to the operator or the damage to the product when it falls
down.
●
Do not use the PCZ1000A in a location where strong magnetic or electric
fields are present or with an input power supply with significant waveform
distortion or noise.
The PCZ1000A may malfunction.
●
Use the PCZ1000A in an industrial environment.
The PCZ1000A may cause interference if used in residential areas. Such use
must be avoided unless the user takes special measures to reduce
electromagnetic emissions to prevent interference to the reception of radio and
television broadcasts.