Kikusui PCR-LA Series Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 40

Kikusui PCR-LA Series Скачать руководство пользователя страница 28

5-4 Parts Names and Functions

RC03-PCR-LA

[9] SIM key

Selects the power line abnormality simulation mode.
In the power line abnormality simulation mode, select the desired

item using the T1, T2, T3, T4, N, and V (T3) keys to perform data

setting.

[10]RUN key

Starts a power line abnormality simulation.
During the simulation, the LED above the RUN key lights up.

[11]STOP key

Stops a power line abnormality simulation

[12]F key, Hz LED

Selects the frequency setting mode. The “Hz” and “SET” LEDs

light up.

[13]I key, A LED

Selects the current measurement mode. The “A” LED lights up.

[14]V key, V/SET LED

Selects the voltage setting mode. The “V” and “SET” LEDs light

up.

V-MODE (SHIFT, V) key

Switches the voltage display mode. The voltage display mode

includes the set voltage (SET) and rms value (RMS). In SET or

RMS, the “V” and “SET” LEDs or the “V” LED lights up, respec-
tively.

[15]Numeric display

This is a 5-digit 7-segment LED display.

[16]RANGE indication

Displays the output voltage range.
“100V” lights up above the RANGE indication for the 100V range;

“200V” lights up for the 200V range.

[17]MODE indication

Displays the output voltage mode.
“AC” lights up in the AC mode, “AC-S” lights up in the AC-S mode,

and “DC” lights up in the DC mode.

«
...
26
27
28
29
30
...
»

Содержание PCR-LA Series









































Отзывы:

Нет отзывов