Kikusui KHA3000, Руководство по эксплуатации, Страница: 217 / 392

9
KHA3000
217
Ex
ecuting V
olta
g
e Fluctuation T
ests
Starting the Test by Pressing the START key
(61000-3-11)
1
Press the VIEW key.
p. 79
The Vf-Observation and Analysis display appears.
2
Select a view type for the test.
To observe voltage fluctuations, select Pinst (St) Waveform. Some displays can be
selected only after the test ends.
3
Press the START key.
The dialog box for confirming the line impedance is displayed.
p. 87
If the optional current sensor is not connected or recognized although "Sensor" is
selected in the Current Input Terminal setting, a confirmation dialog will be presented.
If the sum (

) of the real power of each input phase is negative, a confirmation dialog
will be presented.
4
Select the F1 key (OK), after checking the setting of the test conditions
according to the comment in the dialogbox.
If the F2 key (Cancel) is selected, the test start is canceled. To start the test, return to Step 3.
The test is started.
Aborting the Test by Pressing the STOP Key
�
Press the STOP key during the test.
The test ending menu (p.218) is displayed. Test results are aborted. The subsequent
operations are the same as for
“ When the Test Time Expires (61000-3-11). ”
When the Test is Aborted Automatically
The test is aborted automatically when a measured value exceeds the voltage or current range,
synchronization of PLL fails, or overheating of the current detecting portion is detected.
The test ending menu (p.218) is displayed. Test results are aborted. The subsequent
operations are the same as for
“ When the Test Time Expires (61000-3-11). ”
S ee
S ee
Display during test
Test status display Switches from “ Set ” to “ Test. ”
The progress bar extends from left to right. When it reaches the right
end, the test ends.
Time display Remaining test time
View type The view type that is set in the Vf-Observation and Analysis display
(Vf-VIEW)
Display after the test ends
Test status display Switches from “ Test ” to “ Analysis. ”
The progress bar extends to the right end.