Kikusui KHA1000, Руководство по эксплуатации, Страница: 143 / 274

KHA1000
5-41
5
H
arm
o
n
ic
C
u
rr
en
t T
es
t
5.5 Test Execution
This section shows the steps from setting the test conditions to printing reports.
•
To prevent an electric shock, do not touch the SOURCE or LOAD
terminals of this product.
•
Do not touch the OUTPUT terminal of the AC Power Supply.
•
Do not touch the INPUT or OUTPUT terminals of the Line Impedance
Network.
Preparation for test
Page
Set test system
Set test conditions
Select observation display
4-12
5-2
5-23
• Set AC Power Supply.
• Set Line Impedance Network if
required.
• Setting for selected standards
• Set in-test observation display.
JIS
• Select JIS C61000-3-2(2005), JIS
C61000-3-2(2019), and set Reference
Impedance to Use. Alternatively, select
JIS C61000-3-2(2003), and perform the
measurement with the AC power supply
not connected to any loads.
Check AC
Power Supply
5-36
Start test 5-42
• Steady measurement state
START
• Press START key.
Test 5-42
• View test progress using progress bar.
• Test ends automatically when the
measuring time runs out.
• Press STOP key to stop test.
Analysis 5-43
• Analyze test results.
Save test results 5-43
• Save to compact flash card.
Report printing 5-43
• Save to compact flash card.
• Print through network printer using
Ethernet port (factory option).
Stop test 5-47
• The product is placed in a steady
measurement state.
See
WARNING