Kikusui KHA1000 Скачать руководство пользователя страница 104 | Manualshive

Страница: 104 / 274

Kikusui KHA1000 Скачать руководство пользователя страница 104

5-2

KHA1000

5.1

Setting IEC 61000-3-2 (Ed2.2/Ed3.0/Ed5.0) Test
Conditions

Set test conditions in the HA Test Conditions List display. The conditions thus set
are also used for the HA Observation and Test Conditions display.

Fig.5-1

HA Test Conditions List display IEC Ed2.2/Ed2.0

Showing the HA Test Conditions List Display

Press the HA key.
The HA key LED illuminates, and the HA Test Conditions List display appears.
While the test status shown on the upper left of the display

is “Test” or “Analysis,”

the mode cannot be changed. The dialog box message “Can’t execute during test/
analysis. Please operate it after ending” is displayed.
In this case, press the VIEW key to turn off its LED. Select “Exit” from the

displayed menu.

Test conditions can be set during measurement.

Set test conditions in the HA Observation and Test Conditions display. The
measurement display is set in the HA Observation and Analysis display (HA-
VIEW) and uses the same menu as in the HA Test Conditions List display.



View selection and transition

1.

Press the HA key.

The HA key LED illuminates and the HA Test Conditions List display appears.

2.

Press the VIEW key.

The VIEW key LED illuminates, and the HA Observation and Analysis display (HA-
VIEW) appears.

F1

F2

F3

F4

F5

F6

See

«
...
102
103
104
105
106
...
»

Содержание KHA1000



















































































































































































































































































Отзывы:

Нет отзывов