149-10A
9
2.1 Receiving Inspection
Immediately upon receipt of the product, inspect it for any damage
which might have been sustained while in transportation. If any
signs of damage are found, contact Kikusui distributor/agent.
2.2 AC Line Requirements
Before turning on the POWER switch of the tester, be sure that
your AC line voltage.
The AC line requirements of the tester are as follows:
• Nominal voltage: 100 V
• Voltage tolerance:
±
10 % of nominal voltage
• Nominal frequency: 50/60 Hz
Testers that operate on other AC line voltages as shown below also
are available as factory-modification options.
• 110 V, 120 V, 220 V, 230 V, or 240 V
The following table is printed on the rear panel of the tester. If
nothing is marked in the "LINE VOLTAGE" column, the nominal
voltage is 100 V. If a change has been made, a mark is indicated to
the left of the corresponding voltage.
LINE VOLTAGE
FUSE
STANDARD
100 V
250V
0.5A
110 V
120 V
220 V
250V
0.3A
230 V
240 V
Preparation
Chapter 2
