Revised on 03/28/22 Copyright © March28th, 2022 by Kifco
®
Inc.
20
IMPORTANT:
If the standard irrigation run does not require the use of 100% of the tube on the Wa-
ter
-
Reel; it will be necessary to occasionally pull the entire length of tube off of the Water
-
Reel and
retract the tube under pressure to ensure the concentric shape of the tube. During short runs of
the Water
-
Reel, the remaining tube on the spool will tend to gradually loosen. Over time, gaps in
the tube on the spool will create Level Wind to tube mis
-
alignment causing the machine to become
out of time or the possibility of the tube mis
-
wrapping causing damage to the Water
-
Reel and the
tube. This can be corrected by making a full run (pull 100% of the tube out) occasionally.
Gaps in tube caused
by short runs
Water
-
Reel Start
-
Up & Operation
