KIFCO WATER-REEL E 210L, Руководство оператора

Страница: 15 / 35

Revised on 03/28/22 Copyright © March28th, 2022 by Kifco
®
Inc. 15
Water - Reel Start - Up & Operation
8. It is considerably easier to have an assistant back at the machine to warn the driver that the maximum length
of hose has been reached.
If operating alone; the driver will be able to observe the white markings on the spool core beginning to show.
This indicates to the driver that the maximum length of hose on the machine is about to be reached.
It is advised to leave one or two hose coil wraps on the spool when Gun Cart pull - out is complete. Tighten the
remaining tube on the spool by rotating spool and packing coils together.
Disconnect the Tow Chain and store back onto the Gun Cart.
9. Determine if the automatic water shut - off is to be used and set the valve accordingly.
*The Actuator
Valve
is a stem valve located on the Gun Cart of the Water Reel. This must not be used as an ON/OFF valve
for any purpose other than to automatically shut - off the sprinkler at the completion of an irrigation run.
Note
: Actuator valve
must
be reset before each
irrigation run.
The Sprinkler Flow Selector Valve will only operate automatically if the Actuator Valve has been reset.
To ready Gun Cart for irrigation run: pull the Bumper back towards the hose. Press the Actuator Valve knob
towards the valve body.
Pull Bumper back
towards hose
Push Actuator Valve knob
in towards the valve body
Sprinkler Flow Selector Valve
Pressure Relief Valve
*SEE BELOW for function explanation
Sprinkler Flow Selector
Valve ON
Sprinkler will Shut off at
end of run
Most commonly used se-
lection
Sprinkler Flow Selector
Valve OFF
Sprinkler will
NOT
Shut
off at end of run
Sprinkler Flow Selector
Valve OFF
Sprinkler will
NOT
Shut
off at end of run