Kiepe Elektrik HES 21 Series, Руководство по эксплуатации

Страница: 10 / 30

10
HES and SEL Operating instructions
4 Technical data
CO
NFIDENTIAL
4 Technical data
4.1 General technical data
In compliance with the following
standards and regulations EN 60947-5-1
VDE 0110 – Pollution degree 2 (inside), 4 (outside)
Suitable for Controls and installations according to EN 60204
Casing HES: Aluminum, SEL: Gray cast iron
Mounting HES: two slotted holes for M 8 screws
SEL: two slotted holes for M 10 screws
Permissible ambient temperature - 25 °C to + 70 °C, see also Section 4.3, page 12
Permissible storage temperature - 25 °C to + 70 °C, see also Section 4.3, page 12
Max. altitude above sea level 2.000 m (contact manufacturer for installation on sites at higher altitudes)
Protection standard IP 67 according to EN 60529
Switching system Snap-acting switch, max. four positive-opening change-over contacts, see also
Section 4.3, page 12
Type of drive Cylindrical roller made from stainless steel, Ø 48 mm
Switch points Adjustable: 5° to 15° and 15° to 35°
Default setting: 2 x 10°
Deflection of the roller lever Max. 75°
Rated insulation voltage U
i
AC 380 V, DC 250 V
Conventional thermal current I
th
6 A
Breaking capacity AC-15: U
e
= AC 230 V, I
e
= 1.5 A
DC 24 V, t = 2 ms to 3 ms, to 3 A