Kienzle Automotive MCR1116BTK, Инструкция по эксплуатации

Страница: 14 / 38

14
SOUND SETTINGS
Long press the
[DISP]
button and press the
[ ]
button to select the EQ MENU setting mode. Pressing
the
[OK]
button shows the current EQ. Rotate the
[volume knob]
to change the preset of the EQ in
this order:
EQ OFF -> POP -> ROCK -> CLASSIC-> JAZZ -> CUSTOM
Long press the
[DISP]
button and press
[ ]
button to select the EQ MENU, press the
[OK]
button and
press
[ ]
or
[ ]
to select USER. Rotate the
[volume knob]
to select a value.
BALANCE: LEFT 1-7<-CENTER->RIGHT 1-7
FADER: FRONT 1-7<-CENTER->REAR 1-7
LOUD: ON/OFF
In the CUSTOM mode, press the
[OK]
button to enter and then press the
[ ]
or
[ ]
button to select
USER preset including:
BASS-G: -7~+7
TRE-F: 10.0K/12.5K/15.0K/17.5K
TRE-G: -7~+7
MID-Q: 0.5/0.75/1.0/1.25
MID-FRE: 500/1K/1.5K/2.5K
MID-G: -7~+7
BASS-Q: 1.0/1.25/1.5/2.0
BASS-FRE: 60/80/100/200
ELECTRICAL CONNECTIONS
No. Pin definition No. Pin definition
1 NC 11 Rear Right (+)
2 Telemute 12 Rear Right (-)
3 NC 13 Front Right (+)
4 B12V 14 Front Right (-)
5 AMP Remote 15 Front Left (+)
6 Illumination 16 Front Left (-)
7 ACC +12V 17 Rear Left (+)
8 Ground 0V 18 Rear Left (-)
Radio antenna
USB2
Microphone
Steering wheel control
Front right
Line-out (Red)
Front left
Line-out (White)
A